HOME > FAQ

    How to Maintenance of the vibrator of vibratory stress relief equipment?

    2020-06-29

    How to Maintenance of the MOTOR or of vibratory stress relieving machine?

    a. Pay attention to shock during normal use;

    b. If it is put on hold temporarily, you must take moisture-proof measures or power on for 20 minutes every half a month;

    c. If the box is dusty or dirty, it can be cleaned with a dry cloth or alcohol with a purity of more than 95%;

    d. When used in a heavy dust environment, the dust inside the box must be blown away with compressed air or leather tiger every certain time;

    e. Always check whether the motor carbon brushes are in good contact. When the wear exceeds 2/3 of the original height, the carbon brush of the same brand and specification should be replaced After applying the new carbon brush, it must be close to the commutator with No. 0 glass sand cloth, and rotate the rotor back and forth to grind;

    f. Pay attention to the operation and heat generation of motor bearings and eccentric bearings. If there are any abnormalities, the bearing grease or bearings should be replaced. (Eccentric box The bearings are: imported single-row radial ball bearings 6206 and 6207, and the grease uses high-speed bearing grease; the motor bearings are: single-row

    Radial ball bearing 6202, grease 2# low temperature grease);

    g. Because the work piece of the exciter is in a strong vibration state and the working conditions are bad, in order to prevent accidents, the fasteners at various parts should be checked frequently to avoid loosening and prevent accidents.













      DETAILS                                                                                 INQUIRY


    Previous : Operation method of HB-vibratory stress relief equipment
    Next : What's vibratory stress relief device

    Related news

    • Contact us

      Contact:Mr. Brady

      Tel:+86 19002521703

      Cell:+86 15866605088(wechat/whatsapp)

      Email: brady0086@hotmail.com

      Address: 3966 ERHUANDONG


    • PRODUCTS

      vibratory stress relief equipment superfinishing equipment superfinishing tool welding stress relief equipment NDT(Non-destructive flaw testing) Metal stress detector

    • SUPPORT

      NEWSPRODUCTSCUSTOMERSFAQCONTACT

    • cooperation

    LINK：

    Main business:vibratory stress relief equipment(VSR),HUABAO Copyright © 2013 Contact:Mr. Brady CELL: +86 15866605088(Wechat) @:brady0086@hotmail.com/NANJING BRANCH:B1 HUIZHIPARK,NANJING CELL:+86 190 02521703

    WhatsApp contact